Conical Bottom Bulk Storage Tanks

Manufactured from linear polyethylene in one piece, seamless construction this tank series is designed for either indoor or outdoor use. Cone bottoms provide for quick and complete drainage.

There are two styles to choose from:

  • JC- Commercial Series is designed to handle contents that have a maximum specific gravity of 1.5 at 73 F.
  • JA- Industrial Series is designed to handle contents that have a maximum specific gravity of 1.9 at 73 F.
  • High impact and chemical resistance. Resin complies with U.S. Food and Drug Administration regulation 21 CFR 177.1520
  • Translucent* for visible content level. - Molded in Calibrations. - Molded in tie down slots. - 30 cone angle.
  • Heavy duty stands available for seismic zone 4 requirements. Also available is a full array of tank fittings and accessories.
  • The capacity is 1500 to 7500 gallons.
  • *The degree of translucency varies with wall thickness and tank color.

**JH Stand must be used when seismic restraints are required.

NOTE: JK Stand adds approximately 12" to overall height. JH Stand adds approximately 16" to overall height.

wpe48.jpg (8246 bytes)

1500 to 7500 gallons

Conical Bottom Bulk Storage Tanks
with Polyethylene Support Stands

This unique design incorporates an ALL POLYETHYLENE concepts for greater corrosion resistance, less maintenance and lighter weight.

JP Series is designed to handle contents that have a maximum specific gravity of 1.5 at 73 F.

No metal stands to maintain. – Molded in calibrations (1050 – 2500 gallon). – Excellent chemical and impact resistance.  The capacity is 175 to 2500 gallons.

wpe49.jpg (4469 bytes)
175 to 2500 gallons

Return to ChemTainer Index