Round Horizontal Bulk Storage Tanks

Manufactured form linear polyethylene in one piece, seamless construction, this tank series is designed for storage and non-DOT regulated transport applications. UV stabilized for outdoor usage.

There are two styles to choose from:

  • LC-Commercial Series is designed to handle contents that have a maximum specific gravity of 1.5 at 73 F.
  • LA-Industrial Series is designed to handle contents that have a maximum specific gravity 1.9 at 73 F.
  • Molded in legs for greater tank stability.
  • Excellent impact and chemical resistance. 
  • Resin complies with U.S. Food and Drug Administration regulation 21 CFR 177.1520.
  • Anti-surge baffles molded in on tanks 525 gallons through 1625 gallons. 
  • Translucent* for visible content level.
  • Most sizes are available with steel platforms and straps for mounting on vehicles.  
  • Molded in calibrations.
  • *The degree of translucency varies with wall thickness and tank color.
  • The capacity is 30 to 1025 gallons.   Support bands required for 125 gal. and up.

wpe33.jpg (5327 bytes)
30 to 2500 gallons


Elliptical Horizontal Bulk Storage Tanks

Large capacity horizontal tanks that are designed for storage and non-DOT regulated transport applications. UV stabilized for outdoor use.

  • MC-Commercial Series is designed to handle contents that have a maximum specific gravity of 1.5 at 73 F.
  • MA-Industrial Series is designed to handle contents that have a maximum specific gravity of 1.9 at 73 F.
  • Excellent chemical resistant. – Linear polyethylene 
  • Resin complies with U.S. Food and Drug Administration regulation 21 CFR 177.1520 
  • Translucent* for visible content level. 
  • Anti-surge baffles in size 1000 gallons through 2625 gallons. – Molded in calibrations.
  • There is a full array of tank fittings and accessories available.
  • The capacity is 300 to 2625 gallons
  • Optional Ladder for 2625 Tank – Part #TN2625LD

wpe34.jpg (8913 bytes)
300 to 2625 gallons


Horizontal Storage Tanks – Sump Bottoms

LP Series is designed to handle contents with a specific gravity of 1.5 at 73 F. All tanks in this series have a sump bottom for better drainage.

  • Excellent chemical resistance. – Linear polyethylene
  • " bulkhead is standard on 20-55 gallon tanks; "and " bulkhead is standard on 110-200 gallon tanks.
  • Resin complies with U.S. Food and Drug Administration regulation 21 CFR 177.1520.
  • The capacity is 20 to 500 gallons
  • NOTE: 20  – 200 gallon Series LP tanks and saddles must be elevated to permit access to the factory installed bottom fittings.
wpe35.jpg (3559 bytes)
Return to Molded Tank Index