Krystil Klear Model C44, C66 and C88 Housings - For liquid filtration

Model C44, C66 and C88 are cartridge filter housings.  Simple in design and rugged in construction. The three models represent the diameter of the chamber in relationship to pipe diameters.  The C44 is constructed from 4" pipe, C66 from 6" pipe and the C88 from 8" pipe.  All chambers are available in four different lengths that allow for 10", 20", 30" or 40" cartridges. The below chart shows the capacity of each regarding flow rate.
KK-66FILTER.jpg (70569 bytes) STANDARD FEATURES
  • Carbon, 304, or 316 stainless steel material ·
  • Low pressure drop ·
  • Quick swing closure with eye nuts ·
  • Buna (standard) lid seal ·
  • Differential, drain, and vent ports ·
  • 316 stainless steel guide posts and springs ·

As a Standard finish - all vessels are blast cleaned and painted inside and out with a 2-part epoxy · Stainless steel vessels are supplied with a satin finish

OPTIONS

  • Adjustable support legs
  • 222 or 226 SOE tubes
  • ASME Code U or UM

OPTIONAL MATERIALS FOR HOUSINGS 

  • Low carbon · 316-L SS · 304-L SS

OPTIONAL SEAL MATERIALS

  • Viton®, Ethylene propylene, Teflon®, FEP encapsulated Viton or silicone, Silicone (solid)
SERVICING OF FILTER

A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located on the body of the housing to install gauges for monitoring the differential pressure across the filter cartridge. Permanently piped housings are opened with simple tools without disturbing the piping. Swing bolts with eye-nuts allow easy opening and closing of the swing-lid.

Specifications:

Model – basket length Surface Area (sq.ft.)* Filter elements Max flow rating GPM** Connection – NPT or flanges Pressure rating – standard listed first
C44-10 2.5 1-10" 5 ¾ through 2 300,500 PSI
C44-20 5 1-20" 10 ¾ through 2 300,500 PSI
C44-30 7.5 1-30" 15 ¾ through 2 300,500 PSI
C44-40 10 1-40" 20 ¾ through 2 300,500 PSI
C66-20 15 3-20" 30 1 through 2 150 PSI
C66-30 22.5 3-30" 45 1 through 2 150 PSI
C66-40 30 3-40" 60 1 through 2 150 PSI
C88-20 30 6-20" 60 2 through 4 150 PSI
C88-30 45 6-30" 90 2 through 4 150 PSI
C88-40 60 6-40" 120 2 through 4 150 PSI

*Surface are is based upon 2.5 sq. feet per 10" tube length

**Flow rate is based upon 5 GPM per 10" tube length

Please note:  Contact us with details regarding the type and diameter of cartridge filter tube being used to assure correct fit.  Above number of cartridges are based upon 2.62" maximum diameter.  We have manifolds for 2.75" and larger diameter.

Larger units are available and will be added to our web site by fall 99 - OK, it is not completed yet.

Information on cartridge filters

Back to Krystil Klear Index

Need a similar product in thermoplastic ?   Penguin Filter Housings

Back to Filtration Main Index