Krystil Klear Hydraulic Filter Housings
KK-Hydraulic.jpg (55329 bytes) Flow rates to 120 GPM

FEATURES

  • Carbon or 304 stainless steel construction
  • 100 PSI pressure rating
  • Low pressure drop
  • Quick swing closure with eye nuts
  • Buna lid seal
  • 2 inch clean-out port
  • Full tie-rod element connections for positive seal
  • 2 inch in-line connection design
  • Vented lid to accelerate evacuation and filling
  • Quality construction and design assure protection for all down-stream equipment.
Krystil Klear's Hydraulic Housing is designed for the removal of particulate from oils and industrial fluids. Housings accept standard element I.D. of 2-5/8" to 31/2", O.D. of 6" or 7" and heights up to 36 inches.
APPLICATIONS:

Can be used for filtering diesel fuel, fuel oils, solvents, mineral oil, transformer oils, hydraulic systems and numerous industrial process fluids.


VESSEL CONSTRUCTION:

Housing is designed for operating up to 100 PSI at 250oF. The housing design provides a large sump area at the bottom for dirt and scale accumulation with a convenient 2 inch clean-out port. This design utilizes the filter more efficiently and prolongs the element life.

Permanently piped housings are opened with simple tools without disturbing the piping.

Swing bolts with eye-nuts allow easy opening and closing of swing-lid. No need to remove any hardware.

As a standard finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel vessels are supplied with a satin finish.

Replacement elements for particulate  removal and water/particulate removal

Back to Filtration Main Index

Back to Krystil Klear Index